3D printing

[rahulkulkarni_k]

uArm Serial No.: (the No. at the bottom of each uArm reading “UARM-XXXXXXXXXX”)

Firmware Version:

Operation System: Win(7,8,9,10)/Mac/Linux

uArm Controlling Method: uArm Studio 1.1.22/cura 2.4.0

Hi
Recently I have purchased 3D printing kit and laser engraving.While laser engraving is working fine, 3D printer does not even gets heat up.And there is no clear information regarding uArm 3D printing. As you can see temperature is showing as N/A.And 1.4 Hrs for a 6*6 mm square hollow block? its ridiculous

I have a startup specially for educational robots.I was planning to purchase more uArm for my lab and now I have to go for other makes.

---

UFACTORY Website
Official Store
uArm User Facebook Group

Feedback:
English
中文通道

[Daniel]

@rahulkulkarni_k

Recently I have purchased 3D printing kit and laser engraving.While laser engraving is working fine, 3D printer does not even gets heat up.And there is no clear information regarding uArm 3D printing. As you can see temperature is showing as N/A.And 1.4 Hrs for a 6*6 mm square hollow block? its ridiculous

Please contact support@ufactory.cc with your order number.
Thanks

[vetrolet]

I have the same problem. Did you solve it? I know that it was 3 years ago, but I hope you can help me.

[Minna]

Hi Vetrolet,

Please share the SN on the bottom of uArm to minna.zhong@ufactory.cc, and help to confirm the firmware version.

Best regards,
Minna