uArm swift pro recovery

TheNameXDD 2022-11-02 11:10:52 UTC #1

Hello, can I can recover my robot uarm swift pro system? I uploaded there wrong code and want to recover system. I found in Developer’s manual link for download software, but this link (Google drive) is not working. Can someone share with me arduino source code?

Minna 2022-11-03 04:34:57 UTC #2

Hi Sir,

Please find the source code in the below link.
https://github.com/uArm-Developer/SwiftProForArduino

You can download the uArmStudio software and reflash the firmware.
https://www.ufactory.cc/download-uarm-robot

Best regards,
Minna

TheNameXDD 2022-11-03 07:56:23 UTC #3

Can you please exactly explain to me how recover the uarm swift pro firmware?
That’s the steps?

Minna 2022-11-03 08:20:09 UTC #4

Hi Sir,

How did you upload the wrong code? You just need to upload marlin.ino with arduino in the same way.
https://github.com/uArm-Developer/SwiftProForArduino/tree/develop/src

Or you can connect uArm to uArmStudio, flash the firmware via ‘Setting-Updates’.

TheNameXDD 2022-11-03 08:34:22 UTC #5

In Arduino IDE i just uploaded G code command into arm and after that he did’t worked.

Minna 2022-11-04 02:53:17 UTC #6

Hi,

Do you download the uArmStudio and try to flash the firmware via ‘Settings-updates’?