Xarm6 TCP/IP Communication connect fail

xArm/850 Troubleshooting
1

I have a problem connecting between Xarm6 and the laptop by TCP/IP communication. The control box’s IP address is 192.168.1.228 so I changed my laptop’s IP to as same as the control box. (sorry for the attached Image is written in Korean)

image
image1578×669 33.3 KB

Also, I tested the ping of the system.

Even I checked IP and Ping, Xarm studio displayed “Server is not ready” and also I failed to communicate through Python because of the time out of the system.

I don’t know what should I have to check to move forward. One thing that could be the problem is the connected ethernet’s status is an unidentified network.

Could you let me know how could I fix it?

2

Hi Jae_lee

Please note that the IP address of the controller and the PC should be in the same network segment, but not exactly the same. Please modify the IP of your PC, e.g modify it to 192.168.1.200

Best regards,
Minna